|
| Specifications:
BMFBR to RS232/485/422 |
|
|
| |
| |
| Isolation |
Electromagnetic: Power-to-RS-232/422/485, Power-to-Chassis, RS-232/422/485-to-Chassis.
Hi-Pot: 1500VRMS for 1minute, xxxx VDC for 1 second
Leakage Current: Less than xxxuA @ 1500VAC / 60Hz; xxxx VDC |
| Baud Rate |
0 to 115Kbps |
| Range |
RS-422 and RS-485 4000 Ft (1.23kM) @ 38.4Kbps using 24AWG twisted pair
Optical - Up to 1.2 Miles (2kM) |
| Weight |
13.5 oz. (383 Grams) |
Power |
7 to 24 Volts AC / 9 to 36 Volts DC @ 155mA (max)
9 VDC @ 155 mA (max)
12 VDC @ 110 mA (max)
24 VDC @ 60 mA (max)
36 VDC @ 40 mA (max) |
| Enclosure |
18 Gage Stainless Steel Type 304 |
| Dimensions |
Height: 4.6 Inches (117mm)
Depth: 4.16 Inches (106mm)
Width: 1.00 Inch (25mm) |
| RS-485/422 |
Supports RS-422, 2 or 4 wire, RS-485 Autodetect
Input resistance: 12KS to 15KS (single unit load) |
| RS-485 Enable |
Automatic, Patented ADFCTM technology automatically controls data flow direction |
| RS-232 |
Supports TxD, RxD, DTR, DSR, RTS, CTS, DCD
Connector: DB9 male or female
DCE or DTE selectable
Short circuit protected
Input resistance: 3KS to 7KS
ESD tolerance > +/-15kV |
| Optical Transmitter |
820 nm LED, Type ST connector, IEC AEL class 1, Output Power -22.2 to -6.9 dBm
(min.) depending on model and fiber type.
650 nm LED, Type ST or SMA connector, IEC AEL class 1, Output Power -7.5 dBm
(POF), -18.0 dBm (HCS) |
| Optical Receiver |
820 nm, Type ST connector, -24 dBm minimum input
650 nm, Type ST or SMA connector, -21.6 dBm (POF), -23dBm (HCS) |
Operating
Temperature |
-25°C to +80°C |
| Storage Temperature |
-45°C to +100°C |
| Humidity |
5% to 95% RH |
| Compliance |
Pending (CE, FCC Class A, CUL, UL safety Class II) |
| Accessories |
Din Rail Mounting Kit P/N DA-01
AC Power Adapter: North American 120V input P/N BM-PS120
AC Power Adapter: European Universal input 90 to 264 VAC P/N BM-PSU |
| Surge Protection |
600 Watt transient voltage suppression on all RS-232/485/422 and power lines |
| Indicators |
Power, RxD, TxD, Link and Collision LEDs |
Optical Link Performance Data
820 nm Standard Power (Option M)
Temperature = +25 degrees C unless otherwise noted |
Fiber Cable
(Multimode) |
Typical
Output Power
(dBm) |
Minimum
Receiver
Sensitivity
(dBm) |
Maximum Link
Distance (Worst Case) |
Maximum Link
Distance (Typical) |
| Kilometers |
Miles |
Kilometers |
Miles |
| 50/125 µm |
-18.2 |
-25.4 |
.300 |
.190 |
1.50 |
0.93 |
| 62.5/125 µm |
-15.4 |
1.00 |
.620 |
2.50 |
1.55 |
| 100/140 µm |
-11.4 |
1.45 |
.900 |
3.33 |
2.07 |
| 200 µm HCS |
-5.9 |
1.35 |
.840 |
2.75 |
1.71 |
820 nm High Power (Option E)
Temperature = +25 degrees C unless otherwise noted |
Fiber Cable
(Multimode) |
Typical
Output Power
(dBm) |
Minimum
Receiver
Sensitivity
(dBm) |
Maximum Link
Distance (Worst Case) |
Maximum Link
Distance (Typical) |
| Kilometers |
Miles |
Kilometers |
Miles |
| 50/125 µm |
-15.2 |
-25.4 |
1.05 |
0.65 |
2.75 |
1.60 |
| 62.5/125 µm |
-11.4 |
2.00 |
1.24 |
3.93 |
2.44 |
| 100/140 µm |
-7.9 |
2.09 |
1.30 |
4.39 |
2.73 |
| 200 µm HCS |
-3.9 |
1.55 |
0.96 |
3.08 |
1.92 |
Notes:
1. Link distances are based on continuous fiber, no splices
2. Output power measured at the end of 1 meter of optical fiber with large area detector.
3. Input sensitivity measured at the end of the fiber optic cable with large area detector.
4. Includes a 3dB optical safety margin to account for aging. |
650 nm (Option A and T)
Temperature = 0 to +70 degrees C unless otherwise noted |
Fiber Cable
(Multimode) |
Typical Output Power
(dBm) |
Minimum Receiver
Sensitivity (dBm) |
Maximum Link
Distance (Worst Case) |
| Meters |
Feet |
| 200 µm HCS |
-18.0 |
-23.0 |
200 |
656 |
| 1mm POF |
-7.5 |
-21.6 |
48 |
158 |
Notes:
1. Link distances are based on continuous fiber, no splices
2. Output power measured at the end of 0.5 meters of optical fiber with large area detector.
3. Input sensitivity measured at the end of the fiber optic cable with large area detector.
4. 1mm POF 0.23dB/m worst case attenuation.
5. HCS 10dB/km worst case attenuation.
6. Includes a 3dB optical safety margin for POF.
7. Includes a 2dB optical safety margin for HCS. |
|
|
|
©
Copyright 2006 dutec.
www.dutec.net |
